bridge, structure: Modern Bridge Designs

There are six basic modern bridge forms: the beam, the truss, the arch, the cantilever, the cable-stayed, and the suspension. A beam bridge is made of long timber, metal, or concrete beams anchored at each end. If the beams are arranged in a lattice, such as a triangle, so that each shares only a portion of the weight on any part of the structure, the result is a truss bridge. An arch bridge has a bowed shape causing the vertical force of the weight it carries to produce a horizontal outward force at its ends. It may be constructed of steel, concrete, or masonry. A cantilever bridge is formed by self-supporting arms anchored at and projecting toward one another from the ends; they meet in the middle of the span where they are connected together or support a third member. In a cable-stayed bridge, the roadway is supported by cables attached directly to the supporting tower or towers. This differs from a suspension bridge, where the roadway is suspended from vertical cables that are in turn attached to two or more main cables. These main cables hang from two towers and have their ends anchored in bedrock or concrete.

The modern era of bridge building began with the development of the Bessemer process for converting cast iron into steel. It became possible to design framed structures with greater ease and flexibility. Single-piece, rolled steel beams can support spans of 50 to 100 ft (15–30 m), depending on the load. Larger, built-up beams are made for longer spans; a steel box-beam bridge with an 850-ft (260-m) span crosses the Rhine at Cologne.

Sections in this article:

• Introduction
• Military Bridges
• Movable Bridges
• Cable-Stayed, Suspension, and Combination Bridges
• Truss, Arch, and Cantilever Bridges
• Modern Bridge Designs
• Early Bridges
• Bibliography

The Columbia Electronic Encyclopedia, 6th ed. Copyright © 2024, Columbia University Press. All rights reserved.

See more Encyclopedia articles on: Technology: Terms and Concepts