metallurgy: Separation of the Metal

Processes for separating the metal from the impurities it is found with or the other elements with which it is combined depend upon the chemical nature of the ore to be treated and upon the properties of the metal to be extracted. Gold and silver are often removed from the impurities associated with them by treatment with mercury, in which they are soluble. Another method for the separation of gold and silver is the so-called cyanide process. The Parkes process, which is based on silver being soluble in molten zinc while lead is not, is used to free silver from lead ores. Since almost all the metals are found combined with other elements in nature, chemical reactions are required to set them free. These chemical processes are classified as pyrometallurgy, electrometallurgy, and hydrometallurgy.

Pyrometallurgy, or the use of heat for the treatment of an ore, includes smelting and roasting. If the ore is an oxide, it is heated with a reducing agent, such as carbon in the form of coke or coal; the oxygen of the ore combines with the carbon and is removed in carbon dioxide, a gas (see oxidation and reduction). The waste material in the ore is called gangue; it is removed by means of a substance called a flux which, when heated, combines with it to form a molten mass called slag. Being lighter than the metal, the slag floats on it and can be skimmed or drawn off. The flux used depends upon the chemical nature of the ore; limestone is usually employed with a siliceous gangue. A sulfide ore is commonly roasted, i.e., heated in air. The metal of the ore combines with oxygen of the air to form an oxide, and the sulfur of the ore also combines with oxygen to form sulfur dioxide, which, being a gas, passes off. The metallic oxide is then treated with a reducing agent. When a carbonate ore is heated, the oxide of the metal is formed, and carbon dioxide is given off; the oxide is then reduced.

Electrometallurgy includes the preparation of certain active metals, such as aluminum, calcium, barium, magnesium, potassium, and sodium, by electrolysis: a fused compound of the metal, commonly the chloride, is subjected to an electric current, the metal collecting at the cathode.

Hydrometallurgy, sometimes called leaching, involves the selective dissolution of metals from their ores. For example, certain copper oxide and carbonate ores are treated with dilute sulfuric acid, forming water-soluble copper sulfate. The metal is recovered by electrolysis of the solution. If the metal obtained from the ore still contains impurities, special refining processes are required.

Sections in this article:

• Introduction
• Separation of the Metal
• Concentration of the Ore
• Bibliography

The Columbia Electronic Encyclopedia, 6th ed. Copyright © 2024, Columbia University Press. All rights reserved.

See more Encyclopedia articles on: Metallurgy and Mining: Terms and Concepts